Dell PowerConnect W-7200 Series ArubaOS 6.2 CLI Reference Guide - Page 764

show ap ht-rates show ap ht-rates bssid Description Show high-throughput rate information for a basic service set (BSS). Syntax Parameter bssid Description Show data for a specific Basic Service Set Identifier (BSSID) on an AP. An AP's BSSID is usually the AP's MAC address. Examples The output of this command shows high-throughput rates for each supported MCS value. These values are applicable to high-throughput (802.11n-capable) APs only. (host) #show ap ht-rates bssid 00:1a:1e:1e:5a:10 AP "AL12" Radio 0 BSSID 00:1a:1e:1e:5a:10 High-throughput Rates (Mbps) MCS Streams 20 MHz 40 MHz 40 MHz SGI 01 6.5 13.5 15.0 11 13.0 27.0 30.0 21 19.5 40.5 45.0 31 26.0 54.0 60.0 41 39.0 81.0 90.0 51 52.0 108.0 120.0 61 58.5 121.5 135.0 71 65.0 135.0 150.0 82 13.0 27.0 30.0 92 26.0 54.0 60.0 10 2 39.0 81.0 90.0 11 2 52.0 108.0 120.0 12 2 78.0 162.0 180.0 13 2 104.0 216.0 240.0 14 2 117.0 243.0 270.0 15 2 130.0 270.0 300.0 The output of this command includes the following information: Column MCS Streams 20 MHz 40 MHz 40 MHz SGI Description A Modulation Coding Scheme (MCS) values supported on this high-throughput SSID. Number of spatial streams used by the MCS index value. 802.11n data rates for the MCS for 20 Mhz transmissions. 802.11n data rates for the MCS for 40 Mhz transmissions. 802.11n data rates for the MCS for 40 Mhz transmissions using a short guard interval. 764 | show ap ht-rates Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide