Dell PowerConnect W-7200 Series ArubaOS 6.2 CLI Reference Guide - Page 88

aaa timers aaa timers dead-time idle-timeout [seconds] logon-lifetime stats-timeout [seconds] Description This command configures the timers that you can apply to clients and servers. Syntax Parameter dead-time idle-timeout logon-lifetime stats-timeout Description Range Default Maximum period, in minutes, that the controller 0-50 considers an unresponsive authentication server to be "out of service". This timer is only applicable if there are two or more authentication servers configured on the controller. If there is only one authentication server configured, the server is never considered out of service and all requests are sent to the server. If one or more backup servers are configured and a server is unresponsive, it is marked as out of service for the dead time; subsequent requests are sent to the next server on the priority list for the duration of the dead time. If the server is responsive after the dead time has elapsed, it can take over servicing requests from a lower- priority server; if the server continues to be unresponsive, it is marked as down for the dead time. 10 minutes Maximum number of minutes after which a client is considered idle if there is no user traffic from the client. The timeout period is reset if there is a user traffic. If there is no IP traffic in the timeout period or there is no 802.11 traffic as indicated in the station ageout time that is set in the wlan ssid profile, the client is aged out. Once the timeout period has expired, the user is removed immediately and no ping request is sent. If the seconds parameter is not specified, the value defaults to minutes. 1 to 255 minutes (30 to 15300 seconds) 5 minutes (300 seconds) Maximum time, in minutes, that unauthenticated clients are allowed to remain logged on. 0-255 5 minutes User Interim stats timeout value. If the secondssparameter is not specified, the value defaults to minutes. 5-10 minutes( 300 to 600 seconds) 10 minutes (600 seconds) Usage Guidelines These parameters can be left at their default values for most implementations. Example The following command changes the idle time to 10 minutes: 88 | aaa timers Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide