Dell PowerEdge 2400 Activating the Dell PERC2 - Page 6

1 RAID hardware key 2 Latches (2) 3 Socket 8. Replace the cooling shroud and computer cover, and then reconnect the computer and peripherals to their AC power sources and turn them on. 9. Press immediately after you see the following message: = System Setup If you wait too long and your operating system begins to load into memory, let the system complete the load operation; then shut down the system and try again. For more information on the System Setup program, see "Using the System Setup Program" in your system User's Guide. NOTE: To ensure an orderly system shutdown, consult the documentation that accompanied your operating system. 10. Press to switch to Page 2 of the System Setup screen. 11. If the Onboard RAID option is displayed, select this option. If the Primary SCSI option is displayed, the integrated RAID controller was not detected; go to step 1 and repeat all installation steps. 1-4 Dell PowerEdge 2400 Systems-Activating the Dell PowerEdge Expandable RAID Controller 2/Si