Dell PowerEdge 2450 Installation and Troubleshooting Guide (.pdf) - Page 3

(Rev. 11/3/98) FILE LOCATION: C:\Dell\docs\2450\2post\81HFFts0.fm Dell™ PowerEdge™ 2450 Systems Two-Post Rack Installation This document provides instructions for installing a Dell PowerEdge 2450 system in a two-post open-frame relay rack, such as those found in telecommunications equipment facilities. The two-post open-frame relay rack must be properly secured to the floor, to the ceiling or upper wall, and where applicable, to adjacent racks, using floor and wall fasteners and bracing specified or approved by the rack manufacturer or by industry standards. Refer to the two-post open-frame relay rack manufacturer's installation documentation for precautionary warnings and information before attempting this installation. CAUTION: Do not attempt to install the PowerEdge system into a two-post open-frame relay rack that has not been securely anchored in place. Damage to the system and personal injury may result. Refer to the safety instructions in your Dell system documentation for additional safety information regarding rack installation. Rack Kit Components The rack kit includes the following items (see Figure 1): • One tray assembly (PowerEdge 2450 two-post) • Four 12-24 x 0.5-inch pan-head Phillips screws support.dell.com DELL CONFIDENTIAL - Preliminary 9/27/01 Dell PowerEdge 2450 Systems - Two-Post Rack Installation 1