Dell PowerEdge 6400 Expansion-Card Cooling Fan Assembly Installation Info - Page 5
Back up all data., Turn off the system, including any attached peripherals, and disconnect the sys - power supply
View all Dell PowerEdge 6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
This document provides installation instructions for the expansion-card cooling fan assembly. The cooling fans provide airflow to expansion cards installed in the peripheral component interconnect (PCI) expansion slots. Power for the fans is supplied by the peripheral DC power harness. NOTE: To install the expansion-card cooling fan assembly, you must remove and replace the system cover according to the instructions in "Removing and Replacing the Computer Cover" in your system's Installation and Troubleshooting Guide. To install the expansion-card cooling fan assembly, perform the following steps: 1. Back up all data. 2. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 3. Remove the system cover. support.dell.com Installation Information 1-1