Dell PowerEdge 6400 Rack Installation Guide - Page 34
Replacing the Rack Doors
View all Dell PowerEdge 6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
05KCEeb1.fm Page 18 Thursday, September 14, 2000 1:37 PM 5HY 2&$7,21 5 0XOWL?9?.&(HEIP Replacing the Rack Doors The following subsections describe procedures for replacing the rack doors on the 42-U and the 24-U rack. Replacing the Rack Doors on a 42-U Rack CAUTION: To prevent personal injury due to the size and weight of the doors, never attempt to replace the doors by yourself. 1. Lift the front door into position, and align the hinges with the holes in the rack (see Figure 1-3). 2. Slide the hinges into the holes in the rack until the hinge release levers lock the hinges into position. 3. Close the door latch by rotating the handle counterclockwise until it stops, push in the handle until it locks in position, and then slide the cover down over the push button (see Figure 1-2). 4. Repeat steps 1 through 3 to install the back door, but turn the handle clockwise. Replacing the Rack Doors on a 24-U Rack CAUTION: To prevent personal injury due to the size and weight of the doors, never attempt to replace the doors by yourself. 1. Lift the front door into position, and align the hinges with the hinge inserts in the rack (see Figure 1-5). 2. Slide the hinge pins into the hinge insert in the rack until the hinges lock into position. 3. Close the door latch by rotating the handle counterclockwise until it stops, and then push the handle in until it locks in position (see Figure 1-4). 4. Repeat steps 1 through 3 to install the back door. This completes the rack installation for the PowerEdge system. '(// &21),'(17,$/ 3UHOLPLQDU\ 1-18 Rack Installation Guide