Dell PowerEdge C6100 Using the Baseboard Management Controller - Page 14
Maintenance, Firmware Update, Enter Update Mode, Select Firmware to Upload, Force Update
View all Dell PowerEdge C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
www.dell.com | support.dell.com Updating the BMC Firmware Through the GUI Before beginning the firmware update, download the latest firmware version and save it on your local system. During the update, the AC power of the managed system cannot be turned off, and the GUI cannot be closed. To update the firmware, follow these steps: 1 Click the Maintenance button to access the Firmware Update window. 2 Click the Enter Update Mode button. 3 Use the Select Firmware to Upload field to indicate the location of the firmware image. Either browse to the location or enter the path. For example: C:\Updates\V1.0\ 4 To force an update, click the Force Update checkbox. This forces the BMC to update the image without first validating the target board, target product, and version number. 5 Click the Upload Firmware button. 6 A window appears with a message indicating that the firmware image has been verified and compared to the existing device firmware. Click the OK button. 7 The Preserve Configuration checkbox is selected by default. If you do not wish to preserve configuration, click the checkbox to deselect it. Click the Start Upgrade button. 8 A window appears with a message indicating that clicking the OK button will start the upgrade. Click the button to start the operation. 14 Using the Baseboard Management Controller