Dell PowerEdge C6100 Using the Baseboard Management Controller - Page 29
Table 1-27., Dell OEM Commands NETFUN: 2EH, 2FH, Commands, NetFn, Request and Response - manual
View all Dell PowerEdge C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Table 1-27. Dell OEM Commands (NETFUN: 2EH, 2FH) Commands OemSetUbootEthaddr NetFn OEM CMD 21H OemSetUbootEth1addr OEM 23H Request and Response This command is for Dedicated-NIC. After issuing the OEM command, user must reset BMC manually. REQUEST: Byte 1-17: MAC address Byte 18: End data - must be 00H RESPONSE: Byte 1 - Completion code This command is for Shared-NIC. After issuing the OEM command, user must reset BMC manually. REQUEST: Byte 1-17: MAC address Byte 18: End data - must be 00H RESPONSE: Byte 1 - Completion code Using the Baseboard Management Controller 29
Using the Baseboard Management Controller
29
Table 1-27.
Dell OEM Commands (NETFUN: 2EH, 2FH)
Commands
NetFn
CMD
Request and Response
OemSetUbootEthaddr
OEM
21H
This command is for Dedicated-NIC. After
issuing the OEM command, user must reset
BMC manually.
REQUEST:
Byte 1–17: MAC address
Byte 18: End data — must be 00H
RESPONSE:
Byte 1 — Completion code
OemSetUbootEth1addr
OEM
23H
This command is for Shared–NIC. After
issuing the OEM command, user must reset
BMC manually.
REQUEST:
Byte 1–17: MAC address
Byte 18: End data — must be 00H
RESPONSE:
Byte 1 - Completion code