Dell PowerEdge C6145 Hardware Owner's Manual - Page 130
See Replace the screws that secure the cooling-fan bracket to the chassis.
View all Dell PowerEdge C6145 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
4 Place the upper middle plane holder into the chassis. See Figure 3-29. 5 Replace the screws that secure the middle plane holder to the chassis. See Figure 3-29. 6 Place the middle plane holder support into the chassis. See Figure 3-28. 7 Replace the screws that secure the middle plane holder support to the chassis. See Figure 3-28. 8 Place the upper middle plane on the middle plane holder. Make sure that the two stand-offs on the middle plane holder are inserted through the slot on the upper middle plane. See Figure 3-27. 9 Replace the screws that secure the upper middle plane to the middle plane holder. See Figure 3-27. 10 Connect all the cables to the upper middle plane. You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped. 11 Place the cooling-fan bracket into the chassis. See Figure 3-26. 12 Replace the screws that secure the cooling-fan bracket to the chassis. See Figure 3-26. 13 Replace the cooling fans. See "Installing a Cooling Fan" on page 120. 14 Replace the system-board assemblies. See "Installing a System-Board Assembly" on page 88. 15 Close the system, see "Closing the System" on page 118. 16 Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals. 130 | Installing System Components