Dell PowerEdge M830 Dell PowerEdge M830 (For Dell PowerEdge VRTX Enclosure) Ow - Page 48
General memory module installation guidelines, Processor E5
View all Dell PowerEdge M830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
channel 3: memory sockets B4, B8, and B12 Processor 3 channel 0: memory sockets C1, C5, and C9 channel 1: memory sockets C2, C6, and C10 channel 2: memory sockets C3, C7, and C11 channel 3: memory sockets C4, C8, and C12 Processor 4 channel 0: memory sockets D1, D5, and D9 channel 1: memory sockets D2, D6, and D10 channel 2: memory sockets D3, D7, and D11 channel 3: memory sockets D4, D8, and D12 The following table shows the memory populations and operating frequencies for the supported configurations. Processor type DIMM type Intel Xeon Processor E5- 4600 v3 RDIMM LRDIMM DIMMs populated/ channel 1 2 3 1 2 3 Operating Maximum DIMM rank/ frequency (in MT/s) channel 1.2 V 2133, 1866, 1600, and 1333 single and dual rank 2133, 1866, 1600, and 1333 single and dual rank 1866, 1600, and 1333 single and dual rank 2133, 1866, 1600, and 1333 quad rank 2133, 1866, 1600, and 1333 quad rank 1866, 1600, and 1333 quad rank General memory module installation guidelines This system supports Flexible Memory Configuration, enabling the system to be configured and run in any valid chipset architectural configuration. The following are the recommended guidelines for best performance: • RDIMMs and LRDIMMs must not be mixed. • x4 and x8 DRAM based DIMMs can be mixed. For more information, see Mode-Specific Guidelines. • Up to three dual- or single-rank RDIMMs can be populated per channel. • Up to three LRDIMMs can be populated regardless of rank count. • Populate DIMM sockets only if a processor is installed. For dual-processor systems, sockets A1 to A12 and B1 to B12 are available. For four-processor systems, sockets A1 to A12, B1 to B12, C1 to C12, and D1 to D12 are available. • Populate the sockets by highest rank count in the following order - first in sockets with white release levers, then black, and then green. For example, to mix single-rank and dual-rank DIMMs, populate 48