Dell PowerEdge MX740c EMC Technical Specifications - Page 13
USB ports, Internal Dual SD Module, Micro SD vFlash connector, Video specifications - server datasheet
View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
USB ports The Dell EMC PowerEdge MX740c system supports: • One USB 3.0-compliant port on the front of the system • One micro USB/iDRAC Direct USB 2.0-compliant port on the front of the system • One USB 3.0-compliant internal port NOTE: The micro USB 2.0-compliant port on the front of the system can only be used as an iDRAC Direct management port. Internal Dual SD Module The Dell EMC PowerEdge MX740c system supports optional Internal Dual SD module (IDSDM) module. In 14th generation of PowerEdge servers, IDSDM module supports two micro SD cards. Micro SD cards capacities for IDSDM are 16, 32, 64 GB. NOTE: There are two dip switches on the IDSDM module for write-protection. NOTE: One IDSDM card slot is dedicated for redundancy. NOTE: It is recommended to use Dell branded MicroSD cards associated with the IDSDM configured systems. Micro SD vFlash connector The Dell EMC PowerEdge MX740c system supports one dedicated micro SD card on iDRAC module for future vFlash support. It is recommended to use Dell branded MicroSD card associated with the iDRAC module. Video specifications Table 5. Video specifications Type Description Video type Matrox G200 graphics controller integrated with iDRAC Video memory 4 Gb DDR4 shared with iDRAC application memory Environmental specifications NOTE: For additional information about environmental certifications, please refer to the Product Environmental Datasheet located with the Manuals & Documents on www.dell.com/poweredgemanuals Table 6. Temperature specifications Temperature Specifications Storage -40°C to 65°C (-40°F to 149°F) Continuous operation (for altitude less than 950 m or 3117 10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment. ft) Maximum temperature gradient (operating and storage) 20°C/h (68°F/h) Table 7. Relative humidity specifications Relative humidity Storage Operating Specifications 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be noncondensing always. 10% to 80% relative humidity with 29°C (84.2°F) maximum dew point. Technical specifications 13