Dell PowerEdge PDU Metered LCD Cabling PowerEdge T710 - Page 6
Routing the Cables Through the CMA, Right-Side Mounted CMA Installation
![]() |
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Cable Routing Procedures for Dell™ PowerEdge™ T710 Systems Figure 3: Routing the Cables Through the CMA NOTE: Do not store excess cable slack inside the CMA. The cable may protrude through the CMA, thus causing binding and potentially damaging the cable. Cables entering the CMA should have a small amount of slack to avoid cable strain when the CMA is extended. KVM dongle placed inside the basket. Figure 4: Right-Side Mounted CMA Installation Page 4
![](/manual_guide/products/dell-poweredge-rack-enclosure-4820-cabling-poweredge-t710-e95e61f/6.png)
Cable Routing Pr
ocedures for Dellâ„¢ PowerEdgeâ„¢ T710
Systems
Page 4
Figure 3: Routing the Cables Through the CMA
Figure 4: Right-Side Mounted CMA Installation
Cables entering the CMA should have
a small amount of slack to avoid cable
strain when the CMA is extended.
NOTE:
Do not store excess cable
slack inside the CMA. The cable may
protrude through the CMA, thus
causing binding and potentially
damaging the cable.
KVM dongle placed inside the basket.