Dell PowerEdge PDU Metered LCD Cabling PowerEdge T710 - Page 8

Replacing a Power Supply on a PowerEdge™

Get Dell PowerEdge PDU Metered LCD PDF manuals and user guides View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Cable Routing Procedures for Dell™ PowerEdge™ T710 Systems Section 3: Replacing a Power Supply on a PowerEdge™ T710 System With a CMA 1. Remove the CMA tray. 2. Swing the CMA to its service position. 3. Disengage the strain relief and disconnect the power cord from the power supply. 4. Remove and replace the power supply as shown in Figure 7. 5. Plug in the power cord, re-engage the strain relief, return the CMA to the closed (retracted) position, and reinstall the CMA tray. Figure 7: Replacing the Power Supply Page 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
Cable Routing Pr
ocedures for Dell™ PowerEdge™ T710
Systems
Page 6
Section 3: Replacing a Power Supply on a PowerEdge™
T710 System With a
CMA
1.
Remove the CMA tray.
2.
Swing the CMA to its service position.
3.
Disengage the strain relief and disconnect the power cord from the power supply.
4.
Remove and replace the power supply as shown in Figure 7.
5.
Plug in the power cord, re-engage the strain relief, return the CMA to the closed (retracted)
position, and reinstall the CMA tray.
Figure 7: Replacing the Power Supply