Dell PowerEdge R210 Hardware Owner's Manual - Page 53
Embedded System Management - server memory
View all Dell PowerEdge R210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Deleting or Changing an Existing Setup Password 1 Enter the System Setup program and select the System Security. 2 Highlight Setup Password, press to access the setup password window. Press twice to clear the existing setup password. The setting changes to Not Enabled. 3 If you want to assign a new setup password, perform the steps in "Assigning a Setup Password" on page 54. Embedded System Management The USC is an embedded utility that enables systems and storage management tasks from an embedded environment throughout the server's lifecycle. The USC can be started during the boot sequence and can function independently of the operating system. NOTE: Certain platform configurations may not support the full set of features provided by USC. The following features of USC are supported on systems with Baseboard Management Controller (BMC): • Installing an operating system • Running diagnostics to validate the memory, I/O devices, processor, physical disks, and other peripherals When an optional iDRAC6 Express card is installed, USC provides the following additional features: • Downloading and applying firmware updates • Configuring hardware and firmware For more information about setting up USC, configuring hardware and firmware, and deploying the operating system, see the Unified Server Configurator documentation on the Dell Support website at support.dell.com/manuals. Using the System Setup Program and UEFI Boot Manager 55