Dell PowerEdge R650 EMC BIOS and UEFI Reference Guide - Page 10

Table 5. Processor Settings details (continued) Option Processor n Table 6. Processor n details Option Family-Model-Stepping Brand Level 2 Cache Level 3 Cache Number of Cores Maximum Memory Capacity Microcode Description feature is available only on Advanced RAS processors. This option is set to Disabled by default. NOTE: Depending on the number of processors, there might be up to n processors listed. The following settings are displayed for each processor: Description Specifies the family, model, and stepping of the processor as defined by Intel. Specifies the brand name. Specifies the total L2 cache. Specifies the total L3 cache. Specifies the number of cores per processor. Specifies the maximum memory capacity per processor. Specifies the processor microcode version. SATA Settings To view the SATA Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS > SATA Settings. Table 7. SATA Settings details Option Embedded SATA Description Enables the embedded SATA option to be set to Off, AHCI mode , or RAID modes. This option is set to AHCI Mode by default. NOTE: 1. You might also need to change the Boot Mode setting to UEFI. Otherwise, you should set the field to Non-RAID mode. 2. No ESXi and Ubuntu OS support under RAID mode. Security Freeze Lock Write Cache Port n Sends Security Freeze Lock command to the embedded SATA drives during POST. This option is applicable only for AHCI Mode. This option is set to Enabled by default. Enables or disables the command for the embedded SATA drives during POST. This option is set to Disabled by default. Sets the drive type of the selected device. For AHCI Mode or RAID modes, BIOS support is always enabled. Table 8. Port n Options Model Drive Type Descriptions Specifies the drive model of the selected device. Specifies the type of drive attached to the SATA port. 10 Pre-operating system management applications