Dell PowerEdge R740 EMC PowerEdge RAID Controller S140 Users Guide - Page 39
Creating a virtual disk, Checking PERC S140 options and the boot list priority.
View all Dell PowerEdge R740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Figure 8. NVMe Settings in BIOS NOTE: If you change the NVMe Mode setting from RAID to Non RAID, ensure that the NVMe driver (Microsoft or third-party NVMe driver) is installed manually in the Windows environment. Creating a virtual disk For more information about creating a virtual disk, see Creating the virtual disks on page 22. Checking PERC S140 options and the boot list priority. 1. In the Virtual Disks field, ensure the bootable virtual disk is the first virtual disk listed. If the bootable virtual disk is not the first virtual disk listed, see Swapping two virtual disks on page 22. NOTE: If Non-RAID virtual disks are used (and appear in the Virtual Disks list), the Swap Two Virtual Disks option is enabled only if the system contains a RAID Capable physical disk. 2. Select Continue to Boot and press Enter. Installing the drivers 39