Dell PowerEdge R760XA Host Bus Adapter Users Guide HBA 355 and 350 Series - Page 14
ME484 enclosure support for Dell HBA355e Adapter
View all Dell PowerEdge R760XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ME484 enclosure support for Dell HBA355e Adapter Dell HBA355e Adapter supports external enclosure ME484. To connect to external enclosures,HBA355e Adapter uses the HD Mini-SAS SFF-8644 cables. The ME484 enclosure topology rules for Dell HBA355e Adapter are: ● A maximum of two enclosures is supported in a single- or dual-path configurations. ● Both single-path and dual-path configurations on the same Dell HBA355e Adapter card is not supported. ● When using two enclosures together, the two must be either MD14xx or ME484. Mixing of these two types of enclosures is not supported. Also, mixing tape drives and MDxx or ME484 enclosures, on the same controller is not supported. ● Only one enclosure is supported per port. ● Loop back connections of enclosures are not supported. ● Interleaving of ports for multipath configuration is not supported. ● Using port 1 and port 2 for dual-path on the same enclosure is not supported. See Port support matrix for dual path on the ME484 enclosure. Port support matrix for dual path on the ME484 enclosure The following table lists the combination of the ports on controller that support dual path or not support dual path: Table 3. Port support matrix for dual path on the ME484 enclosure Serial number 1 Port 0 Port 1 connected Yes/ connected No Yes/No Yes No Port 2 connected Yes/No Yes Port 3 Dual path support on same ME484 connected Yes/ enclosure Yes/No No No No 2 Yes No No Yes No 3 No Yes Yes No No 4 No Yes No Yes No 5 Yes Yes No No Yes 6 No No Yes Yes Yes 7 Yes Yes Yes Yes Yes MD24xx enclosure supported by Dell HBA355e Adapter Dell HBA355e Adapter supports external enclosures MD2412, MD2424, and MD2460. To connect to external enclosures, HBA355e Adapter uses the SAS-4 EXTERNAL HD (SFF-8674) 36-PIN & SAS-3 HD Mini-SAS SFF-8644. NOTE: At the first level, either SAS3 or SAS4 can be used. NOTE: Cascading SAS4 Cables (JBOD to JBOD - 24G). The MD24xx enclosure topology rules for Dell HBA355e Adapter are: ● Max number of enclosures supported in dual path configurations are MD2412 (8 enclosures), MD2424 (4 enclosures), and MD2460 (2 enclosure). ● Max number of enclosures supported per port are MD2412 (4 enclosures), MD2424 (2 enclosures), and MD2460 (1 enclosure). ● Mixing of MD2412 and MD2424, MD2412 and MD2460, or MD2424 and MD2460 on same port chain is not supported. Use similar enclosures. 14 Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM