Dell PowerEdge R760XA Host Bus Adapter Users Guide HBA 355 and 350 Series - Page 18
Dell HBA multipathing using iDRAC, Dell HBA multipathing using Linux, Dell HBA multipathing using
![]() |
View all Dell PowerEdge R760XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Dell HBA multipathing using iDRAC iDRAC 9 maps paths together for the drives managed by the controller. In iDRAC, each physical drive is presented once on the Storage Configuration page. To determine if your drive is in a multipath configuration, select Storage > Enclosures, expand the enclosure that is in a redundant path setup, and select Advanced properties > Redundant path > Present. Dell HBA multipathing using Linux For information about configuring Dell HBA multipathing using Linux, see the Linux administration documentation. Use the Multipath-l commands to display path information. Dell HBA multipathing using VMware ESXi by default provides the VMware Native Multipathing Plug-In (NMP), which automatically maps paths and manages drives in a multipath configuration. For more information, refer to VMware documentation on NMP. 18 Multipath support on Dell HBA355e Adapter
![](/manual_guide/products/dell-poweredge-r760xa-host-bus-adapter-users-guide-hba-355-350-series-b23a450/18.png)