Dell PowerEdge R940 EMC Technical Specifications - Page 8

System battery specifications, Expansion bus specifications

Page 8 highlights

Table 4. PSU specifications (continued) PSU Class Heat dissipation (maximum) 2400 W AC Platinum 9000 BTU/hr Frequency 50/60 Hz Voltage Power rating Current 200-240 V AC, autoranging 2000 W 100-120 V AC, autoranging derated to 1400 W 16 A 200-240 V AC, autoranging 2400 W NOTE: Heat dissipation is calculated using the PSU wattage rating. NOTE: This system is also designed to connect to the IT power systems with a phase to phase voltage not exceeding 240 V. NOTE: PSUs rated for 1600 W and higher require high-line voltage (200-240 V) to supply their rated capacity. System battery specifications The PowerEdge R940 system supports CR 2032 3.0-V lithium coin cell system battery. Expansion bus specifications The PowerEdge R940 system supports PCI express (PCIe) generation 3 expansion cards, which you can install on the expansion slots available on the system board. If you are using PowerEdge R940 system with four processor configuration, then you can also install the cards by using the expansion card riser. This system supports up to two expansion card risers. The following table provides the expansion card riser specifications: Table 5. Expansion card slots supported on the system board PCIe slot on the system board Slot 1 Processor connection Processor 1 PCIe slots on system board (Height) full height PCIe slots on system board (length) half length x8 Link width Slot width x16 Slot 2 Processor 1 full height half length x16 x16 Slot 3 Processor 1 full height half length x16 x16 Slot 4 Processor 2 full height half length x16 x16 Slot 5 Processor 2 full height half length x8 x16 Slot 6 Processor 2 full height half length x8 x16 Slot 7 Processor 2 full height half length x16 x16 Table 6. Expansion card riser configurations Riser PCIe slot on the expansion card riser Processor connection PCIe slots on riser (Height) Riser 2 (IO_RISER2) Slot 8 Slot 9 Slot 10 Processor 3 Processor 3 Processor 3 full height full height full height Riser 3 (IO_RISER3) Slot 11 Slot 12 Slot 13 Processor 4 Processor 4 Processor 4 full height full height full height PCIe slots on riser (length) 3/4 length half length half length 3/4 length half length half length Link width x16 x16 x16 x16 x16 x16 Slot width x16 x16 x16 x16 x16 x16 8 PowerEdge R940 technical specifications

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

Table 4. PSU specifications (continued)
PSU
Class
Heat dissipation
(maximum)
Frequency
Voltage
Power rating
Current
200–240 V AC,
autoranging
2000 W
2400 W AC
Platinum
9000 BTU/hr
50/60 Hz
100-120 V AC, autoranging
derated to 1400 W
16 A
200–240 V AC,
autoranging
2400 W
NOTE:
Heat dissipation is calculated using the PSU wattage rating.
NOTE:
This system is also designed to connect to the IT power systems with a phase to phase voltage not exceeding
240 V.
NOTE:
PSUs rated for 1600 W and higher require high-line voltage (200-240 V) to supply their rated capacity.
System battery specifications
The PowerEdge R940 system supports CR 2032 3.0-V lithium coin cell system battery.
Expansion bus specifications
The PowerEdge R940 system supports PCI express (PCIe) generation 3 expansion cards, which you can install on the expansion slots
available on the system board. If you are using PowerEdge R940 system with four processor configuration, then you can also install the
cards by using the expansion card riser. This system supports up to two expansion card risers. The following table provides the expansion
card riser specifications:
Table 5. Expansion card slots supported on the system board
PCIe slot on the
system board
Processor
connection
PCIe slots on system
board (Height)
PCIe slots on
system board
(length)
Link width
Slot width
Slot 1
Processor 1
full height
half length
x8
x16
Slot 2
Processor 1
full height
half length
x16
x16
Slot 3
Processor 1
full height
half length
x16
x16
Slot 4
Processor 2
full height
half length
x16
x16
Slot 5
Processor 2
full height
half length
x8
x16
Slot 6
Processor 2
full height
half length
x8
x16
Slot 7
Processor 2
full height
half length
x16
x16
Table 6. Expansion card riser configurations
Riser
PCIe slot on the
expansion card
riser
Processor
connection
PCIe slots on riser
(Height)
PCIe slots
on riser
(length)
Link width
Slot width
Riser 2
(IO_RISER2)
Slot 8
Processor 3
full height
3/4 length
x16
x16
Slot 9
Processor 3
full height
half length
x16
x16
Slot 10
Processor 3
full height
half length
x16
x16
Riser 3
(IO_RISER3)
Slot 11
Processor 4
full height
3/4 length
x16
x16
Slot 12
Processor 4
full height
half length
x16
x16
Slot 13
Processor 4
full height
half length
x16
x16
8
PowerEdge R940 technical specifications