Dell PowerEdge T20 Technical Guide - Page 6

Processors Front side bus (FSB) Memory Hard drive bays SATA ports/speed (on-board) PCIe & PCI slots USB Internal USB LAN on motherboard (LOM) Power supplies Systems management Software RAID Intel Xeon processor E3-1200 product family DMI II (Direct Media Interface) Intel Xeon processor E31200v3 product family, Intel Pentium processors Intel Direct Media Interface Up to 32GB (4 DIMMs): 1GB/2GB/4GB/8GB DDR3 up to 1600MT/s Up to 4 3.5" SATA/SAS (cabled) hard drives or 6 x 2.5" Up to 32GB (4 UDIMM) 2GB/4GB/8GB unbuffered 1600MT/s ECC Up to 6 internal (cabled) hard drives total: • Up to four 3.5" SATA hard drives, plus • Up to two 2.5" SATA hard drives (require expansion kits) with optional controller card 5 ports; 5x3Gbps 4 ports; 2x6Gbps; 2x3Gbps 1x16 (x8, 3.0) 1x8 (x8, 3.0) 1x8 (x4, 2.0) 1x4 (x1, 2.0) 2 (front), 4 (rear) 2.0 2 (type-A adapter) 1 port 1x16 (x16, PCIe 3.0) 1x16 (x4, PCIe 2.0) 1x1 (x1, PCIe 2.0) 1 PCI slot 2 (front), 4 (rear) 2.0 2 (front), 2 (rear) 3.0 2 (10-pin) 1 port 305W 80+ Basic management PERC S100 290W Intel Active Management Technology (AMT) 9.0 (with Intel Xeon processors) Intel Rapid Storage Controller 12.0 PowerEdge T20 base fixed configurations The PowerEdge T20 offers three fixed configurations with options that enable you to tailor your T20 to best suit your needs. Contact your Dell service representative to: • Install additional memory and hard drives. • Add an operating system or application software. • Add external devices, such as laptops, desktop PCs, printers and projectors. • Add deployment services to get you up and running. • Get support services to keep you running smoothly over time. Table 3 outlines the three base fixed configurations on the T20 as well as additional options. Dell PowerEdge T20 Technical Guide 5