Dell PowerSwitch S4112F-ON EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 443

Parameters Default Command Mode Usage Information Example server-timeout seconds - Enter the number of seconds for the 802.1X server timeout, from 1 to 65535. 30 seconds INTERFACE The no version of this command resets the value to the default. OS10(conf-range-eth1/1/7-1/1/8)# dot1x server-timeout 60 Supported Releases 10.2.0E or later dot1x timeout supp-timeout Sets the number of seconds that the device waits for the supplicant to respond to an EAP request frame before the device retransmits the frame. Syntax Parameters Default Command Mode Usage Information Example dot1x timeout supp-timeout seconds supp-timeout seconds - Enter the number of seconds for the 802.1X supplicant timeout, from 1 to 65535. 30 seconds INTERFACE The no version of this command resets the value to the default. OS10(conf-range-eth1/1/7-1/1/8)# dot1x timeout supp-timeout 45 Supported Releases 10.2.0E or later dot1x timeout tx-period Sets the number of seconds that the device waits for a response to an EAP-request/identity frame from the supplicant before retransmitting the request. Syntax Parameters Default Command Mode Usage Information Example dot1x timeout tx-period seconds tx-period seconds - Enter the number of seconds for the 802.1X transmission timeout, from 1 to 65535. 60 seconds INTERFACE The no version of this command resets the value to the default. OS10(conf-range-eth1/1/7-1/1/8)# dot1x timeout tx-period 120 Supported Releases 10.2.0E or later Layer 2 443