Dell PowerSwitch S5212F-ON Open Networking Hardware Diagnostic Guide April 201 - Page 24
Dell EMC DAIG-OS tools, Diagnostic tools
![]() |
View all Dell PowerSwitch S5212F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
5 Dell EMC DAIG-OS tools This section describes how to use the Dell EMC diagnostics operating system (DIAG-OS). The DIAG-OS provides a suite of tools to help diagnose issues seen on the system, or to run a health check to ensure that the hardware is operating properly. Diagnostic tools The DIAG-OS uses standard Linux drivers and contains the following tools you can use to evaluate the health of your system. The tools are packaged for both the DIAG-OS, which is a simple OS of the same kernel version, and small rootfs to support the tools and drivers. NOTE: By default, the system's I/O modules are down. Power up the I/O modules or the Opticstool and NPUtool reports failures. For information about how to power up the I/O modules, see the Dell EMC Installation Guide for your system at www.dell.com/ support. Topics: • edatool • cpldupgradetool • cputool • eepromtool • ethtool • fantool • gpiotool • i2ctool • ipmitool • ledtool • lpctool • memtool • nputool • nvramtool • opticstool • pcitool • phytool • pltool • psutool • rtctool • smartctl • smarttool • smbiostool • storagetool • temptool • updatetool • Diagnostic package 24 Dell EMC DAIG-OS tools
![](/manual_guide/products/dell-powerswitch-s4048ton-open-networking-hardware-diagnostic-guide-2019-eb1bdf1/24.png)