Dell PowerVault 775N Dell PowerVault NAS SCSI Cluster Platform Guide - Page 5
Cluster Data Sheet - powervault 770n
View all Dell PowerVault 775N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Table 1-2 provides the supported RAID controllers and network adapters for your cluster nodes. Table 1-2. Supported RAID Controllers and Network Adapters PowerVault NAS System 770N Supported RAID Controllers Network Adapters PERC 3/DC Intel® PRO/1000 XT PERC 4/DC Intel PRO 1000F NOTE: Install the PERC cards in Intel PRO/100+ PCI-X expansion card slots 2-5. Dell recommends that you do not install Intel PRO/100 S the PERC cards in slots 6 and 7. Intel 10/100/1000 Gigabit Ethernet Broadcom 10/100/1000 Gigabit Ethernet 775N PERC 3/DC PERC 4/DC Cluster Data Sheet The following sheet can be attached to the back of each cluster node or rack and used by the system installer to record important information about the cluster hardware on each cluster component. If you need to call Dell for technical support, complete this sheet before you call and have it available for the technician to assist you with your problem. The following information is required for the configuration matrix form: • Cluster name, installer, date installed, and notes • Cluster system information • Storage array description for each storage array • Service tag information for each cluster component • PCI slot number for each cluster node, a description of each PCI slot, the adapters installed in each slot, and a usage description for each installed adapter Cluster Type PowerVault NAS SCSI Cluster Solution Cluster name Domain name Cluster IP address Cluster subnet mask (same as public network) Platform Guide 5