Dell PowerVault DL2100 Hardware Owner's Manual - Page 62
Integrated Devices Screen, Disabled, Enabled, All Ports On, Only Back Ports On, Ports Off, with PXE - drivers
View all Dell PowerVault DL2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Option Boot Sequence Retry (Disabled default) Description If this field is enabled and the system has failed to boot, the system will reattempt to boot after 30 seconds. Integrated Devices Screen Option Description Integrated SAS/RAID Controller (Enabled default) Enables or disables the integrated storage controller. User Accessible USB Ports Enables or disables the user-accessible USB ports. (All Ports On default) Options are All Ports On, Only Back Ports On, and All Ports Off. Internal USB Port (On default) Enables or disables the internal USB port. Internal SD Card Port Enables or disables the internal SD card port. Embedded NIC1 and NIC2 Embedded NIC3 and NIC4 Enables or disables the OS interface of the four embedded NICs. (The NICs may also be accessed through the system's management controller.) Embedded Gb NICx (NIC1 default: Enabled with PXE; Other NICs: Enabled) Enables or disables the embedded NICs. Options are Enabled, Enabled with PXE, Enabled with iSCSI Boot, and Disabled. PXE support allows the system to boot from the network. MAC Address Displays the MAC address for the NIC. Capability Detected Displays the features of the NIC hardware key, if installed. NOTE: Some NIC features may require the installation of an additional driver. 62 Using the System Setup Program and UEFI Boot Manager