Dell PowerVault DX6012S Dell DX6012S Hardware Owners Manual - Page 25
NVRAM_CLR jumper, Please run SETUP
View all Dell PowerVault DX6012S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Message Causes Corrective Actions BIOS Update Remote BIOS update Attempt Failed! attempt failed. Retry the BIOS update. If problem persists, see "Getting Help" on page 155. Caution! NVRAM_CLR jumper is installed on system board. Please run SETUP NVRAM_CLR jumper is installed in the clear setting. CMOS has been cleared. Move the NVRAM_CLR jumper to the default position (pins 3 and 5). See Figure 6-1 for jumper location. Restart the system and re-enter the BIOS settings. See "Using the System Setup Program and UEFI Boot Manager" on page 45. CPU set to minimum frequency. The processor speed may be If not an intentional setting, intentionally set lower for check any other system power conservation. messages for possible causes. CPU x installed with no memory. Memory modules are required but not installed in the indicated processor's memory slots. Install memory modules for the processor. See "System Memory" on page 83. About Your System 25