Dell PowerVault Storage MD1280 Dell Storage MD1280 Service Guide - Page 28
LED Indicators, Power Supply Units per PSU, Available Hard Drive Power Per Slot
![]() |
View all Dell PowerVault Storage MD1280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
LED Indicators 6 Gbps SAS I/O module Fan module PSU Power Supply Units (per PSU) Watt Voltage Heat dissipation Maximum inrush current Available Hard Drive Power (Per Slot) Supported hard drive power consumption (continuous) I/O Card Power (Per Slot) Maximum power consumed by I/O Card Maximum available power Maximum available power Physical Height Width 14 one-color LED status indicators, four each for the three SAS ports, and two for the module status • One single-color LED indicator for module status • One single-color LED indicator for battery fault status (not currently used) • One single-color LED indicator for fan fault status • One single-color LED indicator for power status • sOtanteussingle‐color LED indicator for PSU fault • Ostanteussingle‐color LED indicator for AC fault • One single‐color LED indicator for power status 2.8 kW 200-240 VAC (8.6 A-4.3 A) 191-147 W Under typical line conditions and over the entire system ambient operating range, the inrush current may reach 55 A for each PSU for 10 ms or less. Up to 1.16 A at +5 V, Up to 1.6 A at +12 V 11 W at +12 V 100 W at +12 V 1 W at +5 V (standby) 22.23 cm (8.75 inches) 48.26 cm (19 inches) 28
![](/manual_guide/products/dell-powervault-storage-md1280-dell-storage-md1280-service-guide-0068f83/28.png)