Dell Precision 350 Setup and Quick Reference Guide - Page 29
see Resolving Software and Hardware Incompatibilities
View all Dell Precision 350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Light Pattern GYYG GYGY GYGG GGYY GGGY Problem Description Possible system board failure. Suggested Resolution Perform the procedures in "System Board Problems" in your User's Guide. If the problem persists, contact Dell. Memory modules are detected, but a memory configuration or compatibility error exists. Possible system board resource and/or hardware failure. Ensure that there are no special memory module/memory connector placement requirements (see "Memory" in your User's Guide). Verify that the memory modules that you are installing are compatible with your computer (see "Memory" in your User's Guide). Reinstall the memory modules and then restart the computer. If the problem persists, contact Dell. Perform the procedure in "System Board Problems" and see "Resolving Software and Hardware Incompatibilities" in your User's Guide. If the problem persists, contact Dell. Possible expansion card failure. Other failures has occurred. 1 Determine if a conflict exists by removing a card (not the video card) and then restarting the computer. 2 If the problem persists, reinstall the card that you removed, remove a different card, and then restart the computer. 3 Repeat this process for each card. If the computer starts normally, troubleshoot the last card removed from the computer for resource conflicts (see "Resolving Software and Hardware Incompatibilities" in your User's Guide). 4 If the problem persists, contact Dell. Ensure that the cables are properly connected from the hard drive, CD drive, and DVD drive to the system board. If the problem persists, contact Dell. Setup and Quick Reference Guide 29