Dell Precision 3620 Precision Tower 3620 Owners Manual - Page 27
Enabled w/PXE, Enable SMART Reporting
View all Dell Precision 3620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Option Date/Time Description Allows you to set the date and time. The changes to the system date and time takes effect immediately. Table 4. System configuration Option Integrated NIC Serial Port SATA Operation Drives SMART Reporting USB Configuration Front USB Configuration Description Allows you to configure the integrated network controller. The options are: • Enable UEFI Network Stack • Disabled NOTE: You can use the Disabled option, only if Active Management Technology (AMT) option is disabled. • Enabled • Enabled w/PXE (Default) • Enabled w/Cloud Desktop Identifies and defines the serial port settings. You can set the serial port to: • Disabled • COM1 (Default) • COM2 • COM3 • COM4 NOTE: The operating system may allocate resources even if the setting is disabled. Allows you to configure the internal SATA hard-drive controller. The options are: • Disabled • AHCI • RAID On (Default) Allows you to configure the SATA drives on board. The options are: • SATA-0 • SATA-1 • SATA-2 • M.2 PCIe SSD-0 Default Setting: All drives are enabled. This field controls if the hard drive errors for the integrated drives are reported during system startup. This technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. • Enable SMART Reporting - This option is disabled by default. Allows you to enable or disable the USB configuration. The options are: • Enable Boot Support • Enable Front USB Ports • Enable rear USB Ports Allows you to enable or disable the Front USB configuration. The options are: • Front Port 1 • Front Port 2 System Setup 27