Dell Precision 3620 Precision Tower 3620 Owners Manual - Page 40

Error message Description Invalid Memory DIMM1 slot does not recognize a memory module. The module should be re-seated or installed. configuration, please populate DIMM1 Keyboard failure A cable or connector may be loose, or the keyboard or keyboard/mouse controller may be faulty. Memory address line A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace failure at address, them. read value expecting value Memory allocation The software you are attempting to run is conflicting with the operating system, another program, or a utility. error Memory data line A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace failure at address, them. read value expecting value Memory double word logic failure at address, read value expecting value A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them. Memory odd/even logic failure at address, read value expecting value A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them Memory write/read A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace failure at address, them. read value expecting value Memory size in CMOS invalid The amount of memory recorded in the computer configuration information does not match the memory installed in the computer. Memory tests terminated by keystroke A keystroke interrupted the memory test. No boot device available The computer cannot find the floppy disk or hard drive. No boot sector on hard-disk drive The computer configuration information in System Setup may be incorrect. No timer tick interrupt A chip on the system board might be malfunctioning. Non-system disk or The floppy disk in drive A does not have a bootable operating system installed on it. Either replace the floppy disk disk error with one that has a bootable operating system, or remove the floppy disk from drive A and restart the computer. Not a boot diskette The operating system is trying to boot to a floppy disk that does not have a bootable operating system installed on it. Insert a bootable floppy disk. Plug and play The computer encountered a problem while trying to configure one or more cards. configuration error Read fault The operating system cannot read from the floppy or hard drive, the computer could not find a particular sector on the disk, or the requested sector is defective. 40 Diagnostics