Dell Precision M3800 Dell Owners Manual - Page 23
Installing the Power-Adapter Port, Removing the Input/Output (I/O) Board - ports
View all Dell Precision M3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
c) Lift the power-adapter port off the palmrest assembly. Installing the Power-Adapter Port 1. Tighten the screw to secure the power-adapter port to the palmrest assembly. 2. Route the power-adapter port cable under the display hinge. 3. Connect the following cables to the system board: a) touch-panel b) power-adapter port 4. Install the: a) battery b) base cover 5. Follow the procedures in After Working Inside Your Computer. Removing the Input/Output (I/O) Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) base cover b) battery c) WLAN card 3. Perform the following steps to remove the I/O board: a) Disconnect the fan, camera, and I/O board cables from the I/O board. b) Remove the screws that secure the I/O board to the palmrest assembly. c) Lift the I/O board from the palmrest assembly. 23