Dell Precision M4700 Dell Precision Mobile Workstation M4700 Owner's Manual - Page 41
Removing the USH Board, Installing the USH Board
View all Dell Precision M4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
e) keyboard trim f) base cover g) battery 5. Follow the procedures in After Working Inside Your Computer. Removing the USH Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) battery b) base cover c) keyboard trim d) keyboard e) optical drive f) hard drive g) palmrest 3. Disconnect the smart-card and the USH cables from the system board. Remove the screws that secure the USH board to the computer and remove it from the computer. Installing the USH Board 1. Align the USH board to its original position on the computer. 2. Tighten the screws to secure the USH board to the computer. 3. Connect the smart-card and the USH board cables to the system board. 4. Install the: a) palmrest b) hard drive c) optical drive d) keyboard e) keyboard trim f) base cover g) battery 5. Follow the procedures in After Working Inside Your Computer. 41