Dell Precision M4700 Dell Precision Mobile Workstation M4700 Owner's Manual - Page 45

Installing the Display Assembly, Removing the Hinge Cover - chassis

Get Dell Precision M4700 PDF manuals and user guides View all Dell Precision M4700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Installing the Display Assembly 1. Tighten the screws to secure the display assembly in place. 2. Connect the camera and LVDS cables to the correct connectors on the system board. NOTE: LVDS cable is available in M6700 only. 3. Place the LVDS cable bracket on the computer and tighten the screws to secure it to the computer (for M6700 only). 4. Route the cables through the routing channels. 5. Insert the wireless antenna cables through the routing hole on the chassis. 6. Tighten the screws at the bottom and back of the computer. 7. Route and connect the antenna cables to their connectors. 8. Install the: a) palmrest b) hard drive c) optical drive d) keyboard e) keyboard trim f) base cover g) battery 9. Follow the procedures in After Working Inside Your Computer. Removing the Hinge Cover 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) battery b) base cover c) keyboard trim d) keyboard e) optical drive f) hard drive g) display assembly 3. Remove the screws that secure the hinge cover to the computer. Remove the hinge cover from the computer. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
Installing the Display Assembly
1.
Tighten the screws to secure the display assembly in place.
2.
Connect the camera and LVDS cables to the correct connectors on the system board.
NOTE:
LVDS cable is available in M6700 only.
3.
Place the LVDS cable bracket on the computer and tighten the screws to secure it to the computer (for M6700
only).
4.
Route the cables through the routing channels.
5.
Insert the wireless antenna cables through the routing hole on the chassis.
6.
Tighten the screws at the bottom and back of the computer.
7.
Route and connect the antenna cables to their connectors.
8.
Install the:
a)
palmrest
b)
hard drive
c)
optical drive
d)
keyboard
e)
keyboard trim
f)
base cover
g)
battery
9.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Hinge Cover
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
battery
b)
base cover
c)
keyboard trim
d)
keyboard
e)
optical drive
f)
hard drive
g)
display assembly
3.
Remove the screws that secure the hinge cover to the computer. Remove the hinge cover from the computer.
45