Dell Precision M6800 Owners Manual - Page 44
Installing the Heat Sink, Removing the Processor
View all Dell Precision M6800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Installing the Heat Sink 1. Replace the heat sink in its slot. 2. Tighten the captive screws to secure the heat sink to the computer. 3. Connect the camera cable to the system board. 4. Install the: a) processor fan b) palm rest c) primary and secondary hard drive d) optical drive e) keyboard f) keyboard trim g) base cover h) battery 5. Follow the procedures in After Working Inside Your Computer. Removing the Processor 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) battery b) base cover c) keyboard trim d) keyboard e) optical drive f) primary and secondary hard drive g) palm rest h) processor fan i) heat sink 44
Installing the Heat Sink
1.
Replace the heat sink in its slot.
2.
Tighten the captive screws to secure the heat sink to the computer.
3.
Connect the camera cable to the system board.
4.
Install the:
a)
processor fan
b)
palm rest
c)
primary and secondary hard drive
d)
optical drive
e)
keyboard
f)
keyboard trim
g)
base cover
h)
battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Processor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
battery
b)
base cover
c)
keyboard trim
d)
keyboard
e)
optical drive
f)
primary and secondary hard drive
g)
palm rest
h)
processor fan
i)
heat sink
44