Dell Precision M6800 Owners Manual - Page 51

Installing the Display Assembly, Removing the Hinge Cover

Get Dell Precision M6800 PDF manuals and user guides View all Dell Precision M6800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Installing the Display Assembly 1. Tighten the screws to secure the display assembly in place. 2. Connect the camera and LVDS cables to the correct connectors on the system board. 3. Place the LVDS cable bracket on the computer and tighten the screws to secure it to the computer. 4. Route the cables through the routing channels. 5. Insert the wireless antenna cables through the routing hole on the chassis. 6. Tighten the screws at the bottom and back of the computer. 7. Route and connect the antenna cables to their connectors. 8. Install the: a) palmrest b) primary and secondary hard drive c) optical drive d) keyboard e) keyboard trim f) base cover g) battery 9. Follow the procedures in After Working Inside Your Computer. Removing the Hinge Cover 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) battery 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Installing the Display Assembly
1.
Tighten the screws to secure the display assembly in place.
2.
Connect the camera and LVDS cables to the correct connectors on the system board.
3.
Place the LVDS cable bracket on the computer and tighten the screws to secure it to the computer.
4.
Route the cables through the routing channels.
5.
Insert the wireless antenna cables through the routing hole on the chassis.
6.
Tighten the screws at the bottom and back of the computer.
7.
Route and connect the antenna cables to their connectors.
8.
Install the:
a)
palmrest
b)
primary and secondary hard drive
c)
optical drive
d)
keyboard
e)
keyboard trim
f)
base cover
g)
battery
9.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Hinge Cover
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
battery
51