Dell Precision Tower 7910 Dell Precision Tower 7910 Owners Manual - Page 18
Installing the Left Cover, Removing the Intrusion Switch - memory
View all Dell Precision Tower 7910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installing the Left Cover 1. Place the computer cover on the chassis. 2. Press down on the cover till it clicks into place. 3. Follow the procedures in After Working Inside Your Computer. Removing the Intrusion Switch 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. left cover b. memory shroud 3. Perform the following steps as shown in the illustration: a. Press the intrusion switch release latch and disconnect the connector from the system board [1,2]. b. Unroute the intrusion switch cable from the chassis [3]. c. Push the intrusion switch downwards and remove it from the computer [4]. 18
Installing the Left Cover
1.
Place the computer cover on the chassis.
2.
Press down on the cover till it clicks into place.
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Intrusion Switch
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
left cover
b.
memory shroud
3.
Perform the following steps as shown in the illustration:
a.
Press the intrusion switch release latch and disconnect the connector from the system board
[1,2].
b.
Unroute the intrusion switch cable from the chassis [3].
c.
Push the intrusion switch downwards and remove it from the computer [4].
18