Dell Precision Tower 7910 Dell Precision Tower 7910 Owners Manual - Page 19
Installing the Intrusion Switch, Removing the PCI Card
View all Dell Precision Tower 7910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the Intrusion Switch 1. Install the intrusion switch into its place holder on the chassis. 2. Route the intrusion-switch cable around the chassis clips and install the connector to the system board. 3. Install: a. memory shroud b. left cover 4. Follow the procedures in After Working Inside Your Computer. Removing the PCI Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the left cover. 3. Open the plastic latch fastening the PCI card in its slot. 19
Installing the Intrusion Switch
1.
Install the intrusion switch into its place holder on the chassis.
2.
Route the intrusion-switch cable around the chassis clips and install the connector to the system
board.
3.
Install:
a.
memory shroud
b.
left cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the PCI Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the left cover.
3.
Open the plastic latch fastening the PCI card in its slot.
19