Dell Precision Tower 7910 Dell Precision Tower 7910 Owners Manual - Page 57
Option, Description, Enable Legacy Option ROMs, Date/Time, Integrated NIC, Enabled w/PXE, Enabled - raid
View all Dell Precision Tower 7910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Option Date/Time Table 3. System Configuration Option Integrated NIC Integrated NIC 2 Serial Port SATA Operation Tower 7910 Drives Description • Enable Legacy Option ROMs (Default) Allows you to set the date and time. The changes to the system date and time takes effect immediately. Description Allows you to configure the integrated network controller. The options are: • Enable UEFI Network Stack • Disabled NOTE: You can use the Disabled option, only if Active Management Technology (AMT) option is disabled. • Enabled • Enabled w/PXE (Default) Allows you to configure the integrated network controller. The options are: • Enabled (Default) • Enabled w/PXE NOTE: This feature is supported only on Tower 7910. Identifies and defines the serial port settings. You can set the serial port to: • Disabled • COM1 (Default) • COM2 • COM3 • COM4 NOTE: The operating system may allocate resources even if the setting is disabled. Allows you to configure the internal SATA hard-drive controller. The options are: • Disabled • ATA • AHCI (Default) NOTE: SATA is configured to support RAID mode. No SATA operation support in Tower 7910. 57