Dell S2418H S2418H/S2418HX Users Guide - Page 27
Removing the Monitor Stand
View all Dell S2418H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Removing the Monitor Stand CAUTION: To prevent scratches on the LCD screen while removing the stand, make sure that the monitor is placed on a soft, clean surface. NOTE: The procedure below is applicable for the default stand. If you purchased any other stand, see the documentation shipped with the stand to set it up. To remove the stand: 1 Place the monitor on the cushion or thick sitting mat near the edge of table. 2 Tilt the stand downwards to access to the release latch. 3 Use a long and thin screwdriver to push the release latch. 4 While pushing the release latch, pull the stand in the arrow direction to remove the stand. Setting Up the Monitor | 27
Setting Up the Monitor
|
27
Removing the Monitor Stand
CAUTION: To prevent scratches on the LCD screen while removing the
stand,
make sure that the monitor is placed on a soft, clean surface.
NOTE:
The procedure below is applicable for the default stand. If you
purchased any other stand, see the documentation shipped with the stand to
set it up.
To remove the stand:
1
Place the monitor on the cushion or thick sitting mat near the edge of table.
2
Tilt the stand downwards to access to the release latch.
3
Use a long and thin screwdriver to push the release latch.
4
While pushing the release latch, pull the stand in the arrow direction to remove
the stand.