Dell S3048-ON EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7 - Page 21
Con switches
View all Dell S3048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
7 7.1 Configure switches This section covers switch configuration for S5248F-ON switches in the different topologies. Commands for all examples are provided as attachments to this guide. Dual switch with VLT This example uses a four-node VxRail cluster connected to a pair of switches configured with VLT, as shown in Figure 12. Dell EMC recommends using this topology. S5248F-Leaf1A 1/1/20 19 18 17 S5248F-Leaf1B 1/1/17 18 19 20 VLTi VxRail node 1 VxRail node 2 VxRail node 3 25GbE connections 100GbE VLTi connections, ports 1/1/53-54 Note: The jump box/DNS server, not shown, is connected to port 1/1/9 on each switch. VxRail node 4 Rack 1 Four-node cluster connected to a pair of switches configured with VLT The commands in the following sections are run to complete the configuration of both leaf switches. The port numbers used in the configuration commands correspond to those shown in Figure 12. Note: The commands in the tables below should be entered in the order shown. All commands are provided in the file attachments named S5248F-1A-vlt.txt and S5248F-1B-vlt.txt. 21 Dell EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7