Dell S3048-ON EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7 - Page 39
show lldp neighbors
![]() |
View all Dell S3048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Note: The command output is the same for all topologies in this guide. 8.1.5 show lldp neighbors The show lldp neighbors command is useful for identifying connected equipment. Interface 1/1/9:1 is connected to the jump box. Interfaces 1/1/17-20 are connected to the Broadcom adapter in each of the VxRail nodes, and 1/1/53-54 are connected to the other leaf. S5248F-Leaf1A# show lldp neighbors Loc PortID Rem Host Name Rem Port Id Rem Chassis Id ethernet1/1/9:1 Not Advertised 00:0a:f7:38:ba:a0 00:0a:f7:38:ba:a0 ethernet1/1/17 Broadcom Adv. Dua... 00:0a:f7:b6:15:d0 00:0a:f7:b6:15:d0 ethernet1/1/17 node-63356 00:0a:f7:b6:15:d0 vmnic0 ethernet1/1/18 Broadcom Adv. Dua... 00:0a:f7:b6:1a:80 00:0a:f7:b6:1a:80 ethernet1/1/18 node-94415 00:0a:f7:b6:1a:80 vmnic0 ethernet1/1/19 Broadcom Adv. Dua... 00:0a:f7:b6:11:c0 00:0a:f7:b6:11:c0 ethernet1/1/19 node-38673 00:0a:f7:b6:11:c0 vmnic0 ethernet1/1/20 Broadcom Adv. Dua... 00:0a:f7:b6:1c:10 00:0a:f7:b6:1c:10 ethernet1/1/20 node-86429 00:0a:f7:b6:1c:10 vmnic0 ethernet1/1/53 S5248F-Leaf1B ethernet1/1/53 d8:9e:f3:bf:ae:00 ethernet1/1/54 S5248F-Leaf1B ethernet1/1/54 d8:9e:f3:bf:ae:00 If an entry is not shown for the jump box or laptop computer (port 1/1/9:1 above), it means the NIC on the remote system does not have LLDP enabled. This is not required and may be ignored for this solution. Note: For the dual switch without VLT topology, the output is identical to the above. For the single switch topology, the output includes all eight node-connected ports, and ports 1/1/53-54 are not used. 39 Dell EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7
![](/manual_guide/products/dell-powerswitch-s3048on-emc-smartfabric-os10-switch-configuration-guide-vxrail-47-f1f669d/39.png)