Dell S3048-ON EMC S3048-ON and S4048-ON Troubleshooting Guide March 2019 - Page 9
Dell EMC diagnostics, ONIE expansion, S4048–ON or S3048–ON diagnostic package
View all Dell S3048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
3 Dell EMC diagnostics The following describes the Dell EMC diagnostics. These instructions apply to systems for which the ONIE diagnostics are not available. ONIE expansion To view all the ONIE commands available, from the ONIE prompt, enter onie- and click twice. ONIE:/ # onie- onie-boot-mode onie-fwpkg onie-console onie-nos-install onie-discovery-start onie-self-update onie-discovery-stop onie-support onie-syseeprom onie-sysinfo onie-uninstaller Topics: • S4048-ON or S3048-ON diagnostic package • Dell EMC diagnostic test suite • System information • CPLD versions • Factory defaults restore S4048-ON or S3048-ON diagnostic package To install the S4048-ON or S3048-ON diagnostic package on your system, follow these steps. NOTE: Before you begin, go to http://www.dell.com/support and download the diagnostic package. You will need your Dell EMC support access account to download the package. 1 Boot your system to ONIE. 2 Enter the onie-discovery-stop command to stop the ONIE discovery mode (ONIE:/ # onie-discovery-stop). 3 Configure the management interface to download the image using ONIE:/ # ifconfig eth0 xx.xx.xx.xx/xx up. Also ping the server/network IP address. ONIE:/ # ifconfig eth0 xx.xx.xx.xx/xx up ONIE:/ # ping -c4 xx.xx.xx.xx PING xx.xx.xx.xx (xx.xx.xx.xx): 56 data bytes 64 bytes from xx.xx.xx.xx: seq=0 ttl=64 time=0.446 ms 64 bytes from xx.xx.xx.xx: seq=1 ttl=64 time=0.198 ms 64 bytes from xx.xx.xx.xx: seq=2 ttl=64 time=0.183 ms 64 bytes from xx.xx.xx.xx: seq=3 ttl=64 time=0.163 ms --- xx.xx.xx.xx ping statistics --4 packets transmitted, 4 packets received, 0% packet loss round-trip min/avg/max = 0.163/0.247/0.446 ms ONIE:/ # 4 Install the image using the onie-nos-install command. ONIE:/ # onie-nos-install tftp://xx.xx.xx.xx/INSTALLER-DND-SK-x.x.x.xx.bin Stopping: discover... done. ONIE: Executing installer: ./INSTALLER-DND-SK-x.x.x.x.BIN ... INSTALLER-DND-SK-1.0 3% |* INSTALLER-DND-SK-1.0 12% |*** | 878k 0:00:29 ETA | 3477k 0:00:13 ETA Dell EMC diagnostics 9