Dell S5212F-ON EMC PowerSwitch S5200-ON Series BMC User Guide March 2021 - Page 22
Date 6:11Start time, Data1: Protocol
View all Dell S5212F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Table 3. Firewall parameters (continued) Parameter # Remove the IPv4 port number range 18 with timeout rule Drop all IPv4 or IPv6 with timeout rule 19 22 Configuration methods Parameter data ● 6-month ● 7-date ● 8-hour ● 9-minute ● Date 10-15-stop time ● [10:11]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 12-month ● 13-date ● 14-hour ● 15-minute Data 1:-Protocol TCP and UPD ● 0 = TCP ● 1 = UDP ● 2 = both TCP and UDP ● Data 2:5-port number ● [2:3]-Port number from the ports blocked or unblocked based on the state. ● [4:5]-Port number till the ports blocked or unblocked based on the state. ● Date 6:11Start time ● [6:7]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 8-month ● 9-date ● 10-hour ● 11-minute ● Date 12-17-stop time ● [12:13]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 14-month ● 15-date ● 16-hour ● 17-minute Add iptables rules to block IPv4 and IPv6 traffic to the BMC. The state selector is not used. ● Data1: Protocol ● Bit 7:2-Reserved ● Bit 1-IPv6 ● Bit 0-IPv4 ● Date 2:7-Start time ● [2:3]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 4-month ● 5-date ● 6-hour