Dell S5248F-ON EMC Networking Virtualization Overlay with BGP EVPN - Page 14
label, Source, switch, Source IP, address, Destination, Destination IP, Network
View all Dell S5248F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Each link is a separate, point-to-point IP network. Table 1 details the links labeled in Figure 10. The IP addresses in the table are used in the switch configuration examples. Point-to-point network IP addresses Link Source label switch Source IP address Destination switch Destination IP address Network A Spine 1 192.168.1.0 Leaf 1a 192.168.1.1 192.168.1.0/31 B Spine 2 192.168.2.0 Leaf 1a 192.168.2.1 192.168.2.0/31 C Spine 1 D Spine 2 E Spine 1 F Spine 2 G Spine 1 H Spine 2 I Spine 1 J Spine 2 K Spine 1 L Spine 2 M Leaf 1a N Leaf 2a O Leaf 3a 192.168.1.2 192.168.2.2 192.168.1.4 192.168.2.4 192.168.1.6 192.168.2.6 192.168.1.8 192.168.2.8 192.168.1.10 192.168.2.10 192.168.3.0 192.168.3.2 192.168.3.4 Leaf 1b Leaf 1b Leaf 2a Leaf 2a Leaf 2b Leaf 2b Leaf 3a Leaf 3a Leaf 3b Leaf 3b Leaf 1b Leaf 2b Leaf 3b 192.168.1.3 192.168.1.2/31 192.168.2.3 192.168.2.2/31 192.168.1.5 192.168.1.4/31 192.168.2.5 192.168.2.4/31 192.168.1.7 192.168.1.6/31 192.168.2.7 192.168.2.6/31 192.168.1.9 192.168.1.8/31 192.168.2.9 192.168.2.8/31 192.168.1.11 192.168.1.10/31 192.168.2.11 192.168.2.10/31 192.168.3.1 192.168.3.3 192.168.3.5 192.168.3.0/31 192.168.3.2/31 192.168.3.4/31 Note: As with all examples in this guide, any valid IP address scheme can be used. The example point-topoint addresses above use a 31-bit mask to save address space. This is optional and covered in RFC 3021. 14 Dell EMC Networking Virtualization Overlay with BGP EVPN