Dell SE1918HV Monitor Users Guide - Page 48
Operating the Monitor, Power Save, If you press any button other than the power button
View all Dell SE1918HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
You will see the following message before the DDC/CI function is disabled. When the monitor enters the Power Save mode, the following message appears: Activate the computer and wake up the monitor to gain access to the OSD. If you press any button other than the power button, the following messages will appear depending on the selected input: If VGA cable is not connected, a floating dialog box as shown below appears. The monitor will enter Power Save Mode after 5 minutes if left at this state. 48 │ Operating the Monitor
48
│
Operating the Monitor
You will see the following message before the DDC/CI function is disabled.
When the monitor enters the
Power Save
mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the
OSD
.
If you press any button other than the power button, the following messages will
appear depending on the selected input:
If VGA cable is not connected, a floating dialog box as shown below appears. The
monitor will enter Power Save Mode after 5 minutes if left at this state.