Dell ST2410 User Guide - Page 12

Page 12 of 13 Weight Weight with packaging Weight with stand assembly and cables Weight without stand assembly (for wall mount or VESA mount considerations - no cables) Weight of stand assembly 5.86 kg (12.92 lb) 4.89 kg (10.78 lb) 3.93 kg (8.66 lb) 0.70 kg (1.54 lb) 7.1 kg (15.64 lb) 5.84 kg (12.86 lb) 4.83 kg (10.63 lb) 0.70 kg (1.54 lb) 6.78 kg (14.95 lb) 5.54 kg (12.22 lb) 4.58 kg (10.1 lb) 0.70 kg (1.54 lb) Environmental Model Temperature Operating Non-operating Humidity Operating Non-operating Altitude Operating Non-operating Thermal dissipation ST2210 0° to 40° C (32° to 104°F) Storage: -20° to 60° C (-4° to 140° F) Shipping: -20° to 60° C (-4° to 140° F) 10% to 80% (non-condensing) Storage: 5% to 90% (non-condensing) Shipping: 5% to 90% (non-condensing) 4,485 m (14,700 ft) max 12,191 m (40,000 ft) max 95.56 BTU/hour (maximum) 64.85 BTU/hour (typical) ST2310 0° to 40° C (32° to 104°F) Storage: -20° to 60° C (-4° to 140° F) Shipping: -20° to 60° C (-4° to 140° F) 10% to 80% (non-condensing) Storage: 5% to 90% (non-condensing) Shipping: 5% to 90% (non-condensing) 4,485 m (14,700 ft) max 12,191 m (40,000 ft) max 102.36 BTU/hour (maximum) 76.77 BTU/hour (typical) ST2410 0° to 40° C (32° to 104°F) Storage: -20° to 60° C (-4° to 140° F) Shipping: -20° to 60° C (-4° to 140° F) 10% to 80% (non-condensing) Storage: 5% to 90% (non-condensing) Shipping: 5% to 90% (non-condensing) 4,485 m (14,700 ft) max 12,191 m (40,000 ft) max 102.39 BTU/hour (maximum) 78.48 BTU/hour (typical) Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. If required, the user can select different settings, but in most cases monitor installation is automatic. LCD Monitor Quality & Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot. When the pixel remains permanently lit, it is known as a "bright dot." When the pixel remains black, it is known as a "dark dot." In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more information, see Dell Support site at: support.dell.com. http://support.dell.com/support/edocs/MONITORS/ST2x10/en/ug/about.htm 1/17/2012