Dell Studio 15z Service Manual - Page 41

Back to Contents Page Speaker Assembly Dell Studio™ 1555 Service Manual Removing the Speaker Assembly Replacing the Speaker Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer. Removing the Speaker Assembly 1. Follow the instructions in Before You Begin. 2. Remove the palm rest (see Removing the Palm Rest). 3. Remove the screw on the palm rest. 1 screw 4. Turn the palm rest over. 5. Remove the four screws on the speakers. 6. Release the speaker cable from the securing tabs on the palm rest and take out the speaker assembly. 1 screws (4) 2 speaker cable Replacing the Speaker Assembly 1. Replace the four screws securing the speaker assembly to the palm rest.