Dell Studio XPS 9100 Setup Guide - Page 31
Solving Problems, Beep Codes - ram
View all Dell Studio XPS 9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Solving Problems This section provides troubleshooting information for your computer. If you cannot solve your problem using the following guidelines, see "Using Support Tools" on page 36 or "Contacting Dell" on page 57. Beep Codes Your computer might emit a series of beeps during start-up if there are errors or problems. This series of beeps, called a beep code, identifies a problem. Write down the beep code and contact Dell (see "Contacting Dell" on page 57). Beep Code Possible Problem One Possible system board failure - BIOS ROM checksum failure Two No RAM detected NOTE: If you installed or replaced the memory module, ensure that the memory module is seated properly. Three Possible system board failure - Chipset error Four RAM read/write failure Five Real Time Clock failure Six Video card or chip failure Seven Processor failure 29