Dell Studio XPS 9100 Setup Guide - Page 41
Hardware Troubleshooter
View all Dell Studio XPS 9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Using Support Tools No timer tick interrupt - A chip on the system board might be malfunctioning or there might be a system board failure. See the Service Manual at support.dell.com/manuals or contact Dell for assistance (see "Contacting Dell" on page 57). USB over current error - Disconnect the USB device. Your USB device needs more power for it to function properly. Use an external power source to connect the USB device, or if your device has two USB cables, connect both of them. NOTICE - Hard Drive SELF MONITORING SYSTEM has reported that a parameter has exceeded its normal operating range. Dell recommends that you back up your data regularly. A parameter out of range may or may not indicate a potential hard drive problem - S.M.A.R.T error, possible hard drive failure. Contact Dell for assistance (see "Contacting Dell" on page 57). Hardware Troubleshooter If a device is either not detected during the operating system setup or is detected but incorrectly configured, you can use the Hardware Troubleshooter to resolve the incompatibility. To start the Hardware Troubleshooter: 1. Click Start → Help and Support. 2. Type hardware troubleshooter in the search field and press to start the search. 3. In the search results, select the option that best describes the problem and follow the remaining troubleshooting steps. 39