Dell TrueMobile 2350 Dell Wireless 2350 Broadband Router User's Guide - Page 171
DHCP Log, WAN Ethernet Settings, Setting/Device, Information Displayed, Button, Action, Release, Renew
View all Dell TrueMobile 2350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Wired Client (LAN) Wireless Client An active connection indicates the WAN interface of the router has a valid IP address and your computers can connect to the Internet via the router. Shown as an active connection when a wired client is configured and physically connected to your network, and inactive when the Ethernet cable is disconnected from the computer. Shown as an active connection when a wireless client is configured for your network, and inactive when there is no wireless client connected to your router. When the Dell Wireless 2350 Broadband Router acts as a DHCP server, it assigns IP addresses to the clients on the network. These IP addresses are displayed in the DHCP Log below the Device Status figure. WAN Ethernet Settings Refer to the left side of the screen for the following WAN Ethernet settings and the Internet protocol (IP) settings for the Wireless 2350: Setting/Device Internet Router IP LAN MAC WAN MAC Router Name Firmware Version GUI Version Wireless Channel Network Name Information Displayed The connection to the Internet is Active/Not Active IP address assigned to the Dell Wireless 2350 Broadband Router MAC address for the LAN and Wireless interfaces MAC address for the WAN interface The name for the Dell Wireless 2350 Broadband Router (the default is Wireless 2350 Broadband Router) Version number of the firmware currently installed on the Dell Wireless 2350 Broadband Router Version number of the Web Based configuration tool currently installed on the Dell Wireless 2350 Broadband Router Radio channel on which the Dell Wireless 2350 Broadband Router is communicating on the air A unique network name that identifies the network. It is also known as SSID (Service Set Identifer). When a client station tries to connect to the router, the user must know the router's SSID first. The following buttons appear on the left navigation bar: Button RELEASE RENEW Action Releases the IP address that the Dell Wireless 2350 Broadband Router has been assigned from your ISP. If the Dell Wireless 2350 Broadband Router has been configured to receive a static IP address, clicking Release does not release this IP address. Renews the IP address with a DHCP server provided by your ISP. If the Dell Wireless 2350 Broadband Router has been configured to receive a static IP address, clicking Renew does not renew the IP address. Back to Top Back to Contents Page