Dell Vostro 260s Owner's Manual (Slim Tower) - Page 36
Installing The I/O Panel
View all Dell Vostro 260s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
10. Remove the SD card reader from the I/O panel bracket. Installing The I/O Panel 1. Place the SD card reader into the I/O panel bracket. 2. Route the cable through the I/O panel slot and then slide the I/O panel towards the top of the computer. 3. Replace the screw that secures the I/O panel. 4. Place the hard drive LED button by pushing it into it's slot. 5. Push the power button into it's slot. 6. Route the three cables through the metal clips. 7. Connect the three I/O panel and FlyWire cables to the system board. 8. Replace the cover. 9. Follow the procedures in After Working Inside Your Computer. 36
10.
Remove the SD card reader from the I/O panel bracket.
Installing The I/O Panel
1.
Place the SD card reader into the I/O panel bracket.
2.
Route the cable through the I/O panel slot and then slide the I/O panel towards the
top of the computer.
3.
Replace the screw that secures the I/O panel.
4.
Place the hard drive LED button by pushing it into it's slot.
5.
Push the power button into it's slot.
6.
Route the three cables through the metal clips.
7.
Connect the three I/O panel and FlyWire cables to the system board.
8.
Replace the
cover
.
9.
Follow the procedures in
After Working Inside Your Computer
.
36